Distributor ClubContact UsHome Page  
       
  　　
  Wireless RF Remotes Control
 
Encrypt Touch-Screen Remote
10 Key Encrypt Mini-Remote
Encrypt Transceiver Module
Encrypt USB RF PC Interface (433)
Universal RF Base Transceiver Module



  Power Line Transmitters
 
128 Address Backlight Mini-Controller
256 Address Backlight Mini-Controller
Scene Control Module (4 Scenes)
Universal Telephone Controller
Crystal Maxi-Controller
Telephone Controller (Simple Version)
PC Interface (USB or RS232 Port)

 
  Crystal Panel Switch
 
Crystal Single-Button Lamp Switch
Crystal Double-Button Lamp Switch
Crystal Single-Button Appliance Switch
Crystal Double-Button Appliance Switch
Crystal Curtain Controller
Crystal Double-Button Scene Switch

 
  Power Line Receivers
 
  Dimmer Module (UK)
  Appliance Module
  One-Load Lamp Module
  Two-Load Lamp Module
  One-Load Appliance Module
  Two-Load Appliance Module
  In-Line Shutter Micro Module
  IR Device Controller
  PDA IR Signal Converter
  IR Device Controller (With IR Eye)
  ACCESSORIES
  3-Phase Coupler
  Mini-Absorber
  PLCBUS Signal Strength Indicator
 

X10/PLCBUS Transfer Interface
 

PLCBUS Security Interface Module

 

10A High-Duty Relay
 

30A 1-Phase Whole-House Filter
 

40A 1-Phase Whole-House Filter
 

30A 3-Phase Whole-House Filter
 

Crystal Panel Color Kit (8 colors)
　 PLCBUS Security Interface Module (XM10+#4808)      PLCBUS 4809UK
 

It is used with HAI, Visonic Security Console, etc. and control PLCBUS modules directly. As if your controller can work with XM10, you can use #4809UK, send out PLCBUS command, and then control our PLCBUS system directly. Till now, our #4809UK can work with following several systems directly successfully, if any other new system ready, we will update below list in time:

1. Orev (Alarm System) with #4809E;
2. Visonic (Alarm System) with #4809E;
3. HAI (Home Automation management). With #4809E;
4. Superna (Home Automation management) with #4809E;
5. Confort (Home Automation management) with #4809E;
6. MainLobby (Home Automation management) with #4809E 

  
 
 
User Code Unify / 3-Phase Status Transfer:  
  

Press Setup button and hold for 5 seconds, the indicator light is bright, releasing now, use PLCBUS-T 4034/4036 send out random command to #4809, which indicator light is OFF means User Code is unified successfully.   
If current PLCBUS-T4034/4036 is 1-Phase status, the #4809E also learns 1-Phase status, and if the PLCBUS-T4034/4036 is 3-Phase status, the #4809E also learns 3-Phase status. (Notice: when learn 3-Phase status, PLCBUS-T 4034/4036 and PLCBUS 4809E must be plugged in the same phase.)
Exiting: Entering Setup status, in 10 seconds, if have no any operation, the indicator light is OFF means exiting automatically.

 
 
Support Commands：  
 
All units off 、 All lights on、 On、 Off、 Dim、 Bright 、 All lights off、  Pre-Set Dim 、 Status Request、Status = on  、Status = off
　
　　　　　　　　　　　　　　　　　　　　　　　　　　 Contract Us | Related Download | Sales & Services